Repairing a Steam Press?I would like to know if there is a company near Hattiesburg, Mississippi that repairs steam presses. I have a China Feiyue Family 1600W Steam Press.
George Foreman Heating ElementI have a George Foreman 10040 and need a heating element.
Fixing A Sewing Machine's Stitch Selector DialThe stitch selector dial of my Kenmore sewing machine 15358 will not turn in any direction. Kindly help.
Fixing a Worn Kid's Blanket?I have a blanket that's been with me for as long as I can remember. I'm older now, but I still want to preserve it as a memory and make it look (and feel) as good as new. There are no holes or anything, it's just worn from years and years of use. Is there anyway I can add to get its softness back in the edges and small patches? I'll do whatever I have to keep this childhood memory.
Repairing a Smith Corona Typewriter?I have a Smith Corona Electra 2 typewriter. Whenever I power it on it makes a bumping sound and the keys don't work. It is very old. Plz help me repair it.
Circuit for Lighted Ceiling Fan Stopped Working?I have a light switch that turns on a ceiling fan, it has worked for years, but now when I flip it to on, the ceiling fan and light does not come on. I have replaced the ceiling fan, but that did not fix it. I replaced the switch and cover, that didn't fix it either. I tested the wires, and it showed up as no voltage. What could the problem be and why would it just suddenly stop working?
Repairing a Spot on a Black Dining Table?This black painted table got something on it that has caused blotches. Is there anything to do to restore the finish? Thank you!
Sewing Machine Won't Turn Off Bobbin WindingI have a really old Kenmore sewing machine and I have it all threaded right. But when I went to start sewing, I noticed that it was set to bobbin winding. I tried to change it but it won't let me. No matter what I try and set it to, it just beeps at me.
Repairing a Sewing MachineI have a "Precision Manufactured Sewing Machine", 200 DeLuxe Morse that needs motor work. I want to do the work myself. Where can I find new motor brushes?
Fixing My New Home Memory Craft Sewing MachineI haven't used my New Home Memory Craft 7000 for a few years but got out today to do some zig zagging of edges. Thought I had threaded properly but after a few stitches, it jammed and I had to cut threads to release fabric. Took plate off under where bobbin is and needle doesn't seem to be taking up bobbin thread. Any ideas please?
Repairing an Oster Bread MakerI have an Oster 5858 bread maker. The shaft that holds the paddle falls out of the bowl base bottom. I have to keep the bowl base with the shaft locked in the breadmaker, then attach the paddle so that I can fill the bowl with liquids and then the dry ingredients. The shaft does sits slightly lower, but still works with the paddle. The bread maker still does a good job of mixing the dough.
Smith Corona Sterling 12 Return Key Not Working?I love my Smith Corona Sterling 12. All functions are working except the return Key is not working. I can manually return, but it really slows the work down. I know this machine has a lot of life left. How can I fix it?
Replacement of New Home Memory Craft Drive BeltI have an New Home Memory Craft 7500. The drive belt broke, can the machine be opened to replace the belt without issues to the computer or mother board?
Repairing a Singer Sewing Machine?I am super brand new to sewing, and I think I turned my hand wheel clockwise a little bit. I noticed my machine will not sew anymore, like at all. When I press my foot pedal nothing happens. What happened? I have a Singer heavy duty HD6380. I thought these machines were friendly for new users... :(
Riding Mower Won't Start Without a Charge?My riding mower will not start unless I charge the battery. Parts store says battery is good.
Singer Not Picking Up Bobbin Thread?My mom's trusty Singer 221-1's bobbin will not catch upper thread from needle. I can't catch the bobbin and pull it through. What is mechanically not happening below with bobbin mechanism?
Repairing a Kenmore Bobbin Threader Clutch?I bought a used Kenmore sewing machine, but the bobbin threader clutch wheel will not tighten no matter how many times I turn it. I tried to take the side panel off to check it out, but it will not come off either.
Finding the Model Number on a New Home Machine?I cannot find the model number. I found a number on the needle plate that is possibly the serial number.
Repairing a Smith Corona 250 Typewriter?The print hammer is continuously ratcheting when I turn on the typewriter. What can I do to fix this?
E5 Code on Singer Patchwork 7285q?So I was sewing a quilt and then all the sudden it threw me a code (E5). I looked in the manual, searched online, etc. nothing came up for it. I called Singer and they told me how to troubleshoot'the machine, being that it could be the motor and the nearest place for me to send it to would be in Kansas and I would have to pay for shipping to and from and labor.
Replacing the Needle on a Vintage Console Stereo?I'm trying to figure out how to replace the needle on this.
Locating Model Number on Good Housekeeper Sewing Machine?I need to figure out the model number of this Good Housekeeper sewing machine so I can look for replacement parts. I had thought the 3347-TW was the model number, but google did not give me a hit on that?
Pump Stopped Working?Our 2 year old Intex pump works for few seconds and shuts off. Is it replaceable?
Repairing a Zojirushi Bread Maker?I have had a Zojirushi breadmaker, model BB-CEC20 for about 7 years, but only started using it more frequently recently, so it hasn't gotten a whole lot of use. Yesterday, it turned off mid-cycle (after the bread rose) and now I can't get it to turn on again. There's no response pressing any of the buttons on the control panel.
How to Remove White Stain from Floor?My son spilled hand sanitizer all over my floor. I am not sure what the floor is, I believe it is like a linoleum tile. It has to be cheap because I rent an apartment in a low income apartment complex.
Repairing an Ironing PressI have a Singer MSP 7 ironing press and can no longer open the top. Has anyone had this experience and what was the solution or cause?
Bobbin Not Working on Kenmore Sewing MachineThe needle's thread no longer picks up the bobbin's thread. I pull thread thru bobbin's slot and under tension spring, place bobbin and case within shuttle, close the little door, and slowly turn the hand wheel to move needle down and up, as per directions, as always.
Repairing a Singer 6268 Sewing Machine?A friend has a Singer 6268 that gets power to it but nothing else happens. How would he fix it?
Repairing a Brother GX-6000 Electronic Typewriter?I recently just found this typewriter in our storage. Every time I turn it on, the carriage moves a bit to the right, stops, then just beeps continuously. I tried to manually move it, and it works fine. I also cleaned out everything and even replaced the ribbon and lift-off tape. I have no idea what to do now.
Descaling a Steam Pro Press 26?'This steam press is not working properly, due to water dripping from steam holes. I checked everything and know it needs descaling. How do I do that?
John Deere Mower Died?My John Deere LA145 riding mower died without warning in the middle of mowing. It will not crank to restart as if it isn't hooked to a battery. I replaced the battery a few lows ago and it worked perfectly until now. I've wiggled all the wires, checked the safety switch, checked gas, unplugged and replugged the spark plugs and checked the fuse.
Bread Pan and Paddle for Black and DeckerPaddle is rubbing and squeaking while the bottom apparatus that the paddle fits on is leaking black matter under the pan. It looks like melting rubber.
Cleaning A Kenmore Sewing MachineI would like to try to open up and clean the upper tension discs on my Kenmore 52 model 158.523 but cannot budge the center of this dial (in photo). I believe these red handled tools were original with the machine so I'm wondering why they don't even fit into this part to loosen it. Is there another tool I'm missing? How does it come apart?
Repairing a Cracked Porcelain DollMy doll is porcelain, and she has red curly hair. She fell of a stool the other day while I was moving her. She did not break, but her face and ear is cracked all the way through. I've read articles about using glue, but i'm not sure how to repair her because I can't glue it from the inside. Is there someplace I can send her to get her fixed, or is there someway I can do it myself?
How Can I Paint my Leather Couch?My old couch needs a make-over. I want to paint it. So can anyone suggest me out to paint and which type of paint I should use to paint leather? Links or any discussion on this topics are welcomed.
Juki Sewing Machine Foot Pedal Stopped Working?My Juki sewing machine foot pedal has suddenly stopped working. I have had the machine 4 years. To be fair, it has had a lot of use over the past 3 months. Will the lead that goes into the foot pull out? It doesn't come out naturally with a bit of a pull. I could unscrew it and take a look? I am not really sure what I'm looking for though.
Huskee Supreme Won't Start?I have a 26hp Briggs in my Huskee. It turns over, but won't start. I put new plugs in and a new safety relay switch, but there is still no spark. I have had the seat safety switch unhooked from years ago. I pulled it into garage running to fix the steering and I went to start it and it just turns over. I'm at a loss, any ideas?
Rocket Chef Blade Replacement?How do you change blades on the Rocket Chef? Mine seems to be stuck and I can't get it out.
Kenmore Elite Fridge Not Cooling?The model number is 795.72489411 s, it is not cooling at all. I initially put it in and out of store/demo mode 5 times and it started working! It worked for 3 days perfectly and now won't do a thing :( The compressor does have a slight hum; no clicking noise. The fan on the back is running. Where do I go next? Repair won't be able to come out for 3 weeks!
Shafts in Bread Machine Fell Out?The shafts in my Black & Decker bread maker fell out and all my liquids spilled out. Is there something to keep them attached to the bread pan?
Dresser Drawers Not Fitting?Just painted this old 7 foot dresser. I marked all drawers to go back to proper place. Sanded the bottom rails, etc. They are in slide well. PROBLEM: they don't go all the way in - flush . May be the top lip of drawer is painted - but it seems more than just that. That is the problem.'
Ford F150 AC/Heater Fan Intermittent?I have a 2011 Ford F150. The heater/AC fan is turning off and intermittently running. The AC goes off. If I turn the switch off and wait 5 - 10 minutes it works for a short time and then shuts off again. Any ideas?
Repairing a Leaking H2O X5 Mop?My H2O X5 mop is leaking from the small hole at the bottom of the base handle, not from the head. It was dropped accidentally and now leaks. As you can see by the picture I put blue tack on it.'
Replacement Dash Harness for a 2003 GMC SonomaEstimate the cost for replacing a dash harness for module 2003 GMC Sonoma.
Restoring My Chalkboard?I can no longer write on my chalkboard. I have used Dawn dish soap, tried using chalk, length wise all over it and nothing is helping. Anyone know something that might work?
My Husqvarna DiedMy Husqvarna was running and cutting grass then it started running rough. I shut off the clutch to the blades and tried to reengage the clutch, nothing. I then shut off the engine, and now there is nothing, nNo click, no pop, nothing! What the hell happened?
Finding H20 Steam Mop PartMy H20 X5 steam mop stopped working. I took it apart and two of the pipes broke. I descaled the little boiler then got some more hose, unfortunately the first I purchased was too thick and couldn't close the unit. The next I got just melted, grrr. Where can I buy some more hose from that will fit and not melt please?
Repairing My Electric FanHelp! My stand fan base is always falling. How to fix it?
Repairing a New Home Memory Craft 7500?Is a New Home Memory Craft 7500 worth getting repaired if it says communication error?
Repairing a Smith Corona xe5200 That Smokes When Plugged In?My Smith corona typewriter that I got from a garage sale started smoking and smelling like burning rubber when I plug it in. None of the keys respond. How do I fix it or how much will it cost to get fixed?
Power Board for a Butterick EB6100?Does anyone know where I can get a power board for this machine. It is not 2 years old and it's failed C&C no help. I returned the first machine after 8 months because the display failed, they eventually replaced it. When it works I love it, but I wouldn't buy again or recommendation sorry to say.
Repairing the Presser Foot on a Kenmore Machine?My presser foot fell off when I touched it and the metal piece fell on top of it with the screw to the side. I don't know what it is or how to fix it. Suggestions?
Pfaff Creative 2140 Screen Issues?I have a Pfaff 2140 that has screen issues. When I plug the machine in and power it on the screen will not display anything and will have a rhythmic ticking noise along with a slight flash from screen. I had done some online searching and found that it could be a capacitor issue, upon finding and replacing what I believed to be the bad capacitor I am still having this issue.
Handheld Sewing Machine Keeps Unthreading?I am having trouble with my handheld sewing machine. I thread it as shown in the instructions, but it creates stitches from the thread already pulled through the needle rather than taking it from the bobbin. Originally it was dropping stitches so I lowered the needle, as suggested in other posts. After that it was sewing perfect stitches, but from the wrong end of the thread.
Vintage Kenmore 158.1040 Wheel Slipping After Oiling?I have been cleaning up and oiling this vintage machine, and it was sewing pretty decently. There was still a catch somewhere, so I was pretty liberal with the oil, trying to locate where it was sticking. But after loosening off the clutch now the wheel is slipping and not turning consistently. It stops, I turn the wheel by hand to get it going, and then it stops again.
Repairing the Latch on a Hoover Carpet Cleaner?How do I reattach the cleaning access latch?
Repairing a Troy-Bilt Riding Mower?How do I find someone who can fix a Troy-Bilt riding lawn mower? I need new blades, belts, and a tire replaced. That's all. I need someone who is honest and that I can trust.
Signer 6268 Foot Pedal Not Working?The foot pedal does not run the machine. There does seem to be electrical connection between the foot pedal and the machine, because when the pedal is pressed, there is a click inside the machine, but no other response, however.
Craftsman LT2000 Shooting Oil into the Carburetor?I have a Craftsman LT2000 mower. Why is oil shooting into my carburetor?
Adjusting the Hinge on a Kenmore Elite Microwave?I have a Kenmore Elite microwave-convection oven combo, model# 790.48903000. The hinges are on the bottom and the latches are on the top. The left latch suddenly will not line up into the hole it's supposed to fit. The door will not close because of it. The right latch still lines up fine as far as I can tell.
Roof Repair Options for Low Income Homeowners?My husband and I are on Social Security. We need to find assistance for replacing our roof. Suggestions?
Parts for a Welbuilt Bread Machine?I have a Welbuilt bread maker Model ABM3300. I need to replace all of the moving parts at the bottom of the bread pan, or perhaps an intact functioning bread pan.
Adjusting the Needle Position on a Kenmore Sewing Machine?Can you adjust the position of the needle on a Kenmore 385 17627 sewing machine? It is currently in the center position and I would like to know if I can move it to the right or left to do some topstitching.
Repairing a Broken Backstitch Lever?Has anyone broken this lever before and managed to get it repaired? I've spoken to a few people who have said they can't get the part and also checked for the part myself and can't find it anywhere.
Revarnishing a DoorA few years ago, I coated my stair door with varnish. It is now looking very stressed. My question is can I use new varnish (the same type and make) without sanding?
Magtronic Control PanelI have a 2 pole und.lab. inc list 20 amp breaker, that I need to replace for my heat pump with a 30 amp 2 pole breaker. Is any current breaker brand compatible? Or where might I find this exact replacement?
Troubleshooting a George Foreman GrillHello all! Hope you are healthy and safe! I have a George Foreman grill, GRP4842. When I plug it in, it lights up. But pressing power does nothing. Zip, zilch, nada. Have tried pressing the other buttons as well. Any suggestions?
Tension Dial Not Working on Brother Sewing Machine?The tension dial on my Brother sewing machine doesn't seem to make a difference with the tension when I turn the dial. Any ideals of what the problem could be?
2003 Yardman Riding Mower Won't StartMy 2003 Yardman Mtd. riding mower has been sitting for a year. It will turn over but won't start. Any ideas? I've got a fresh battery on and the air filter is clean.
Yard Machine Mower Won't Start?I have a Yard Machine, original year of sale, 2004. It has a 14.5 hp Briggs and Stratton engine and a 38" cut. Yesterday when I tried to start it so I could move it, the engine turned slowly and the starter began smoking. I immediately turned the key to off and removed the starter.
My Empisal 760c Overlocker Not Sewing?I bought an Empisal 760c overlocker 3 days ago. As I was busy sewing it jammed and wouldn't sew again, please see attached images. I was sewing 2 layers of faux fur, when it jammed.
Removing Black Spots on an Antique Mirror?How do I remove black spots on an antique dressing table mirror?
Butterick EB6100 Sewing Machine Stuck in ReverseMy machine is stuck in reverse and I've been advised to 'reboot' it. However I don't know how to do this. Can anyone help please?
New Home Sewing Machine Stuck in Reverse?My New Home 6000 sewing machine only sews in reverse. How do I fix this?
Truck Gauges and Air Conditioning Intermittent?I have a Ford F250 Power stroke. While driving all my dash gauges and air stops working. They just flat line and then a couple minutes later all is good. What could be causing this? Also this only happens once in a while. Sometimes not for weeks.
No Power to New Chandelier and Switches?I installed a chandelier and caused a short which tripped the breaker, 2 times. I already know why the short was caused and I fixed it, but now the 2 switches (3 way switches) to the chandelier have no power and neither does the chandelier wires. The outlets that are connected to the same breaker do work. Any ideas?
Singer Sewing Machine Hand Wheel Sticks?I own an old Kenmore model 33 sewing machine that I have used for many years. When stitching, the hand wheel will rotate 3 or 4 times when pressing on the foot pedal and then it gets stuck. I can forcefully rotate the hand wheel and get it to sew again, but must repeat the forceful turning of the hand wheel after a few rotations. Can anyone suggest repairs or recommend a repair service in Maine?
Riding Mower Won't Start?Why won't my riding mower turn over or start?
Bypassing the Clutch Switch on a Yardworks Mower?I have removed the 5 wires from the clutch bypass of my 2007 Yardworks 42 inch lawnmower. Which wires do I join together now to bypass the switch?
Repairing a Loose Microwave Door that Won't Open?I have a Whirlpool microwave oven, model WMC50522AS1. The door will not open when I pushed the button, I have to manually lift the door up a little bit and then the door will pop open. When the door is open, I hold the door and I can feel that the door is loose. Do we have a way to tight it up?
Presser Foot on Singer Won't Move?How do I repair the presser foot on my Singer 360? It does not move when I flip the lever down.
Craftsman LTD 1500 Keeps Dying?I have a Craftsman LTD 1500 riding mower that dies while cutting as if you shut it off, but will crank right back up to repeat itself. What can I do to fix it? It is getting fuel; I checked.
Sunbeam Bread Machine Won't Stop Running?I have a Sunbeam bread machine, model 5891 that as soon as you plug it in it starts running. I have tried to reset it by holding in on the power button, but it won't stop unless I unplug it.
Samsung Dispenses Water Instead of Ice?My Samsung refrigerator model RF4287 will not dispense ice. It is still making ice, but it dispenses water instead when you push the ice dispenser lever.
Ribbon Doesn't Lift on a Smith Corona Typewriter?The ribbon lift on my Smith Corona Coronet Automatic 12 typewriter does not lift up when striking a key resulting in the key not hitting the ribbon. The ribbon lift is movable manually so it isn't stuck in place. Can this be fixed?
Kenmore Ice Maker Is Making Less Ice?My Kenmore ice maker is making ice, but not as much as it used to produce. The ice maker keeps making knocking sounds. I changed the flyer, but the sounds still continue.
Repairing a Morphy Richards 48268 Bread MakerMy Morphy Richards 48268 bread maker was working perfectly. Then this morning there was a rattling sound from the motor area and the paddle and the shaft were not turning.
Now Power But Breaker Not Tripped?I am losing 1 circuit in my family room and no breakers have tripped. When I start pushing them back into the box more the power returns. I am trying to see if this would be a breaker or panel issue.
John Deere Riding Mower Won't Start?I have a John Deere F 910 front mower that I am trying to get running after it has been sitting for some time. The current problem is that the battery will crank one time with no sluggishness, the engine turns over, but doesn't start (carb is most likely clogged but that's another issue) and then the battery is completely dead. I can recharge it fully, but then will have the same result.
Manual for a Nelco Sewing Machine?I am looking for a Nelco sza-820 sewing machine manual. Can anyone help me?
Craftsman 42 Inch Riding Mower Keeps Hitting Starter?I can turn it over and it starts, but it continues to hit the starter.
Toyota Sewing Machine Spool Pin Not Spinning?My wife's Toyota 2260 2640 sewing machine's spool pin won't spin when she uses the foot pedal. Is this an easy fix or should we get it repaired? I know nothing about these machines so don't feel I'm much help.
Small Pieces of Rubber Found in Maytag A9400 Washing Machine?My Maytag top loading washing machine leaves small pieces of rubber in the tub after the washer has finished spinning and the washing is done. It leaves a very small amount of rubber no matter what I am washing. What is the reason for the rubber and what do I need to do to correct this problem? The washing machine does not make any unusual noises or behave in an abnormal way.
Finding Service Manuals for Vintage Singer Sewing Machines?Where can get or download service manuals for vintage Singer sewing machines?
Welbilt Bread Machine Error Codes?As I tried to start my Welbilt bread machine after adding all the ingredients I got an error that said HI. I suspect it's related to the temperature of the water which had gotten a little more than warm (boiling). I can't find this code. It's working now so maybe it cooled down.
Foot Pedal Not Working on My Singer Sewing Machine?My foot pedal isn't working on my sewing machine. It's a Singer Stylist 7258. I looked at the wire and inside the foot pedal and everything looks good. The start/stop function is now the only way my machine sews. Otherwise my sewing machine functions normally. It doesn't show any error code.
Repairing a Silver Reed EZ20 Electric Typewriter?The carriage on this Silver Reed EZ20 electric typewriter had stuck in one position, approximately 3" from the left/start position. On removing the cover, I noticed one end of a cable laying in the base, this I now know, is the cable that moves the carriage along the bar.
When Is detergent Cup Supposed to Open?I have an older GE dishwasher. I am sure it is not worth it to get a repair done. The detergent cup is not opening, it is not blocked and there is no residue gumming up the works. I would like to know when it is supposed to open so I can watch for the right cycle and manually intervene :)
Brand New Singer 3232 Won't Sew or Wind Bobbin?I just bought a Singer 3232, from Amazon. I plugged everything in and have power, but when I tried to load thread onto the bobbin spindle, nothing happened when I pressed the pedal. The motor just revved. The spindle is in the correct position. When I put the bobbin spindle in the sewing position and threaded the needle. I tried to stitch, but again the motor just revved.
How Do I Thread a Singer Handheld Sewing Machine?I just received a Singer handheld sewing machine and the arm won't rise high enough to thread the needle. How can I adjust the arm? The rotary knob won't rise any higher than it was in the package.
Craftsman Riding Lawn Mower Won't Start?I accidentally ran over a hose. Now it won't start. I removed the hose by cutting it away and pulling the rest of it out. Now if I try to start it, it clicked a couple of times and then nothing.
Battery Hooked Up Wrong on Cub Cadet?I recently was given a 2012 Cub Cadet Ltx 1040 for free. I was looking to figure out what's wrong with it when I came across the fact that the battery was hooked up wrong. I can only assume they tried starting it like that. What parts do I need to replace as I believe something must be fried.
Repairing a Pfaff 360 Sewing Machine?I have a Pfaff 360. When cleaning it the position finger spring fell out. I have the instruction manual, I have the repair manual, and I have the supplemental repair manual, but I cannot find this part listed anywhere (it fell out when I was using the brush to clean out under the needle plate. Does anyone know where this goes?
Finding Bathroom Repair Help for Disabled Homeowner?I'm disabled and I need help with my bathroom floor and tub. The floor is about to fall through and I would love to find someone to help me fix it. I have a special needs grandson who also stays with me and his mom. I want to have this done so he don't get hurt. Is there anyone that helps with this situation?
Husqvarna Rider Won't Start?YTH20V46 Husqvarna lawn tractor that won't start. I've checked the fuel, the battery, fuse, and replaced the solenoid. When I turn the key nothing, but the hour display comes on.
John Deere Riding Mower Won't Start?I have a JD L130. I have a new battery, that I bought last month. There is also a new fuse, new safety switch on the brake, and had my starter tested (it's good). However my engine won't start or click. Sometimes I get the display to light up. Any ideas?
Repairing a Hole in the Laminate Countertop?I've had this sink for a while like this. The hole was cut too large for the sink. I've been covering the hole with a plastic mat, which might be the only solution, but I was wondering if there was anything I could do to fill in this? I hate the possibility of water getting in there.
Manual and Parts for a Modern Home De Luxe Sewing Machine?Searching for parts and manuals for a restoration project
